Resetting a Skylink garage door keypad can be necessary if you forget your password or if the keypad malfunctions. Resetting the keypad involves clearing out the previous programming and setting up a new password. In this guide, we will provide you with detailed instructions on how to reset a Skylink garage door keypad, as well as some troubleshooting tips in case you encounter any issues.

Here’s a detailed guide from Garage Door Repair Pompano Beach FL on how to do it:

First, locate the “Learn” button on your garage door opener unit. This button is usually located near the antenna wire or the light bulb socket.

Next, press and hold the “Learn” button until the LED light on the opener unit starts flashing. This indicates that the garage door opener is in “Learn” mode.

Now, press and hold the “0” button on your Skylink keypad until the LED light on the keypad starts flashing. This will clear out any previous programming on the keypad.

Next, enter a new 4-digit code on your Skylink keypad. The LED light on the keypad will flash to indicate that each digit has been entered.

Once you have entered the new code, press the “#” button on your keypad to confirm it. The LED light on the keypad will flash to confirm that the new code has been programmed.

Finally, press the “Learn” button on your garage door opener unit again to exit “Learn” mode. The LED light on the opener unit will turn off, indicating that the programming is complete.

That’s it! You have successfully reset your Skylink garage door keypad. To test it, simply stand outside your garage and enter the new code on the keypad. If the code is entered correctly, the garage door will open. If the code is entered incorrectly, the LED light on the keypad will flash rapidly and the garage door will not open.

If you encounter any issues while resetting your Skylink garage door keypad, here are some troubleshooting tips to help you resolve the problem:

  1. Make sure that you are entering the correct code. The code should be a 4-digit number that you choose yourself.
  2. Ensure that the keypad is within range of the garage door opener unit. If the keypad is too far away, it may not be able to communicate with the opener.
  3. Check that the batteries in the keypad are fresh and installed correctly. If the batteries are low, the keypad may not function properly.
  4. If you are still having trouble, consult the user manual or contact Skylink customer support for further assistance.

Overall, as per Garage Door Repair Pompano Beach FL, I hope this guide was helpful in resetting your Skylink garage door keypad. If you have any other questions, feel free to ask!

Garage Door Experts of Pompano Beach

2350 NE 14th Terrace #8, Pompano Beach, FL 33064, United States

954-787-1268