Changing a Garage Door Repair Colleyville TX spring can be a challenging task for those who have never attempted it before. It is important to understand that garage door springs are under high tension and can cause serious injury if not handled properly.

This guide will walk you through the process of changing a garage door spring, but it is recommended to seek professional help if you are unsure of what you are doing.

Before starting, you will need to gather a few tools:

  • 2 winding bars
  • Adjustable wrench
  • Socket set
  • Vice grips
  • Safety glasses
  • New garage door spring

Step 1: Disconnect the garage door opener

Before working on the garage door, you need to disconnect the opener. This can be done by pulling the emergency release cord, which is usually located near the opener. This will release the garage door from the opener and allow you to manually open and close it.

Step 2: Release tension on the old spring

Next, you will need to release the tension on the old spring. This can be done by using the winding bars to turn the spring in the direction that will loosen it. Insert one winding bar into the first hole of the winding cone, and hold it securely with the vice grips. Insert the other winding bar into the second hole of the winding cone and slowly turn it in the direction that will loosen the spring. Do this until the tension is released.

Step 3: Remove the old spring

Once the tension is released, you can remove the old spring. Use the socket set to remove the bolts that hold the spring in place. Carefully remove the spring and dispose of it properly.

Step 4: Install the new spring

Now it is time to install the new spring. Make sure that the new spring is the same size and type as the old one. Use the adjustable wrench to tighten the bolts that hold the new spring in place.

Step 5: Wind the new spring

With the new spring installed, it is time to wind it. Use the winding bars to turn the spring in the opposite direction that you turned it to release the tension on the old spring. Turn the spring until it is fully wound and the tension is restored.

Step 6: Test the garage door

Once the new spring is installed and wound, test the garage door to make sure it is working properly. Reconnect the garage door opener and test the door to make sure it opens and closes smoothly. If everything is working correctly, you have successfully changed the garage door spring.

In conclusion, changing a Garage Door Repair Colleyville TX spring can be a challenging task, but with the right tools and knowledge, it can be done safely and efficiently. Remember to always take precautions when working with garage door springs and seek professional help if you are unsure of what you are doing.

Colleyville Door and Gates

817-904-4816