Atlas Solar Tex Service Fort Worth TX Here’s a detailed guide on how to install Atlas Solar Tex:

1. Preparation:

  • Before starting the installation process, ensure that the roof surface is clean, dry, and free of any debris, dirt, or loose material. Sweep or pressure wash the surface to remove any dirt, dust, or contaminants that could interfere with adhesion.

2. Repair and Patching:

  • Inspect the roof surface for any cracks, holes, or damage that needs to be repaired before applying Atlas Solar Tex. Use a suitable patching compound or filler to fill in any cracks or holes and smooth out the surface for proper adhesion.

3. Priming:

  • Apply a primer specifically formulated for use with Atlas Solar Tex to ensure proper adhesion and longevity of the coating. Use a paintbrush, roller, or sprayer to apply the primer evenly over the entire surface of the roof. Allow the primer to dry completely before proceeding.

4. Mixing:

  • Thoroughly mix the Atlas Solar Tex coating using a drill with a paddle attachment or by hand using a stir stick. Ensure that the coating is well mixed to achieve a uniform consistency and optimal performance.

5. Application:

  • Apply the Atlas Solar Tex coating using a paintbrush, roller, or sprayer, depending on the size and complexity of the roof. Work in small sections, starting from one end of the roof and working your way towards the other end.
  • Use long, even strokes to apply the coating evenly and ensure uniform coverage. Avoid applying the coating too thickly, as this may result in drips, runs, or uneven curing.
  • Pay special attention to areas such as seams, joints, and flashings, ensuring that they are properly coated and sealed to prevent water infiltration.

6. Drying and Curing:

  • Allow the Atlas Solar Tex coating to dry and cure according to the manufacturer’s instructions. This typically involves allowing the coating to dry for several hours or overnight, depending on factors such as temperature, humidity, and ventilation.
  • Avoid walking on or applying additional coats to the roof until the coating has fully cured to prevent damage or disruption to the curing process.

7. Inspection and Touch-Ups:

  • Once the Atlas Solar Tex coating has dried and cured, inspect the roof surface for any areas that may require touch-ups or additional coats. Use a brush or roller to apply additional coating as needed to ensure complete coverage and optimal performance.

8. Clean-Up:

  • Clean up any tools, equipment, and work areas used during the installation process. Dispose of any leftover coating or materials according to local regulations and guidelines for proper waste disposal.

9. Maintenance:

  • Regular maintenance is essential for maximizing the longevity and performance of Atlas Solar Tex. Inspect the roof periodically for any signs of damage or wear, and repair or touch up as needed to maintain the integrity of the coating.

Conclusion:

Atlas Solar Tex Service Fort Worth TX By following these steps carefully and adhering to the manufacturer’s instructions, you can ensure a successful installation and enjoy the long-term benefits of Atlas Solar Tex for years to come.

Atlas Solar-Tex

6817 Sundance Cir W, Joshua, TX 76058, United States

1-817-447-3500