To properly retain a Garage Door Repair Southlake TX spring, you need to follow specific steps and exercise caution as working with garage door springs can be dangerous.

Here is a detailed guide on how to retension a garage door spring:

  1. Safety precautions:
    • Wear appropriate safety gear, including safety glasses and gloves.
    • Ensure that the garage door is fully closed and disconnected from the power source.
    • Make sure to work with a partner for added safety.
  2. Identify the type of spring system:
    • There are two common types of garage door spring systems: torsion springs and extension springs. Identify which type your garage door has before proceeding.
  3. Torsion spring retensioning:
    • Locate the torsion spring assembly above the garage door.
    • Use a winding bar that fits into one of the winding cones attached to the spring.
    • Insert the winding bar into the winding cone and apply pressure to hold it in place.
    • Slowly rotate the winding cone in the direction that tightens the spring. Typically, this is clockwise for a standard residential door.
    • Continue turning the winding cone until the spring reaches the desired tension. Be cautious not to over-tighten the spring.
    • Repeat the process for the second torsion spring if your garage door has two.
  4. Extension spring retensioning:
    • Extension springs run alongside the horizontal tracks on both sides of the garage door.
    • Find the safety cables that attach to the springs. These cables should be threaded through the extension springs and anchored to the wall or ceiling.
    • Disconnect the safety cables from the brackets holding them in place.
    • Carefully remove the tension from the extension springs by slowly and evenly stretching them.
    • Once the springs are completely extended, reattach the safety cables to the brackets.
    • Slowly release the tension from the springs, allowing them to contract until they reach the desired tension.
  5. Testing the tension:
    • After retensioning the springs, test the balance of the garage door.
    • Manually open the door halfway and release it. It should remain in place without rising or falling.
    • If the door is unbalanced, you may need to adjust the spring tension again until the door stays in place when partially opened.
  6. Regular maintenance:
    • Periodically inspect the springs for signs of wear or damage. Replace any worn or damaged springs immediately.
    • Lubricate the springs and other moving parts of the garage door system regularly to ensure smooth operation.

Remember, if you’re unsure about retensioning Garage Door Repair Southlake TX springs, it’s always best to consult a professional technician with experience in handling garage door systems. They have the necessary tools and expertise to handle the job safely and effectively.

Southlake Best Garage & Overhead Doors

Southlake, TX 76092

817-385-7628