Measuring for a new Garage Door Repair is a crucial step in ensuring a proper fit and functionality. Whether you’re replacing an old door or installing a new one, precise measurements are essential.

In this comprehensive guide, we will walk you through the process step by step, providing you with the knowledge and confidence to get the job done right.

1. Gather Your Tools

Before you begin, make sure you have the following tools and materials ready:

  • Tape measure
  • Step ladder
  • Pen and paper for notes
  • Helper (if needed)

2. Measure the Width

Start by measuring the width of the garage opening. Stand inside the garage facing the opening, and use a tape measure to measure the width from one side to the other. Measure in multiple places to ensure accuracy, as garage openings are not always perfectly square. Record the widest measurement as the width of the opening.

3. Measure the Height

Next, measure the height of the garage opening. Position your tape measure vertically on one side of the opening and measure from the floor to the highest point of the opening. Again, take multiple measurements to account for any irregularities. Record the tallest measurement as the height of the opening.

4. Measure the Headroom

Headroom refers to the space between the top of the opening and the ceiling or any obstructions inside the garage. This measurement is crucial to determine the type of garage door opener you can install. Use a ladder and the tape measure to measure the distance from the top of the opening to the nearest obstruction (e.g., ceiling, pipes, beams). Make sure to measure this distance at multiple points along the width of the opening.

5. Measure the Sideroom

Sideroom is the space on each side of the garage door opening. It’s essential for the proper installation of the door tracks and hardware. Measure the distance from the sides of the opening to the nearest wall or obstruction. Be sure to measure this distance at several points along the height of the opening, as it may not be uniform.

6. Note Any Obstructions

While measuring, make a note of any obstructions inside or around the garage door opening. This includes light fixtures, electrical outlets, and any structural elements that could affect the installation of the garage door or opener.

7. Determine the Type of Garage Door

Based on your measurements and the available space, you can now decide on the type of garage door that will fit your needs. Common garage door types include:

  • Single garage doors: Typically 8 to 10 feet wide and 7 to 8 feet high.
  • Double garage doors: Typically 16 to 18 feet wide and 7 to 8 feet high.

8. Consider Insulation and Material

Think about whether you want an insulated garage door, which can help regulate temperature and energy costs. Additionally, choose the material for your garage door, such as steel, wood, or vinyl, based on your preferences and budget.

9. Consult a Professional

If you’re uncertain about any aspect of the measurement process or the type of door you need, consider consulting a professional garage door installer. They can provide expert advice and ensure accurate measurements.

10. Order Your Garage Door

Once you have all the measurements and specifications, you can order your garage door from a reputable manufacturer or dealer. Be sure to provide them with accurate measurements to avoid ordering the wrong size.

In conclusion, measuring for a new Garage Door Repair requires careful attention to detail and precise measurements. Taking the time to measure accurately will ensure that your new garage door fits perfectly and operates smoothly, enhancing the functionality and aesthetics of your garage. If in doubt, seek professional guidance to make the process easier and more reliable.

Ontario Garage & Overhead Doors

1353 E 7th St, Ontario, CA 91764, United States

1-909-442-4206