Garage Door Repair Parker CO By creating a barrier between the garage floor and the bottom of the door, a threshold seal helps to prevent water, debris, and pests from entering the garage.
Here’s a detailed guide on how to install a garage door threshold seal:
1. Gather Materials and Tools: Before you begin, gather all the materials and tools you’ll need for the installation. This typically includes the threshold seal kit (which includes the threshold seal itself, adhesive, and instructions), a tape measure, a utility knife or scissors, a pencil or marker, and a clean rag.
2. Measure the Garage Door Opening: Start by measuring the width of the garage door opening to determine the length of threshold seal you’ll need. Use a tape measure to measure the width from one side of the opening to the other.
3. Clean the Garage Floor: Thoroughly clean the garage floor where you’ll be installing the threshold seal. Use a broom or shop vacuum to remove any dirt, debris, or dust from the surface. Then, wipe down the area with a clean rag dampened with water to ensure a clean surface for the adhesive.
4. Cut the Threshold Seal to Size: Using a utility knife or scissors, carefully cut the threshold seal to the measured length. Be sure to follow any guidelines or markings provided on the seal itself or in the instructions.
5. Position the Threshold Seal: Place the threshold seal along the bottom of the garage door opening, ensuring that it is centered and aligned properly. Use a pencil or marker to mark the placement of the seal on the garage floor.
6. Apply Adhesive: Apply a generous amount of adhesive to the back of the threshold seal, following the manufacturer’s instructions for the specific type of adhesive included in your kit. Ensure that the adhesive covers the entire length of the seal.
7. Press the Seal into Place: Carefully press the threshold seal into place along the marked line on the garage floor. Use firm pressure to ensure that the seal adheres securely to the floor.
8. Allow the Adhesive to Cure: Allow the adhesive to cure according to the manufacturer’s instructions. This may involve waiting several hours or overnight for the adhesive to fully bond with the garage floor.
9. Test the Seal: Once the adhesive has cured, test the seal by opening and closing the garage door. The seal should compress slightly when the door is closed, creating a tight seal between the bottom of the door and the garage floor.
10. Trim Excess Seal (If Necessary): If the threshold seal extends beyond the edges of the garage door opening, use a utility knife or scissors to trim any excess seal to create a neat and tidy appearance.
11. Clean Up: Dispose of any excess materials and clean up any adhesive residue or mess from the installation area. Use a clean rag dampened with water or adhesive remover to clean up any spills or drips.
12. Maintain and Monitor: To keep your garage door threshold seal working effectively, inspect it regularly for signs of wear or damage. Replace the seal if it becomes worn or damaged to ensure continued protection against water, debris, and pests.
Garage Door Repair Parker CO By following these steps and taking the necessary precautions, you can install a threshold seal easily and enjoy the benefits of a cleaner, more comfortable garage. If you encounter any issues or need assistance during the installation process, consult the manufacturer’s instructions or contact a professional for help.
Martin Garage Door
10411 S Parker Rd, Parker, CO 80134
1-303-663-1310