Programming a code on a Chamberlain Haslet Gates & Garage Doors keypad allows you to conveniently open and close your garage door without the need for a remote control. Each Chamberlain keypad model may have slightly different programming procedures, so it’s important to refer to your keypad’s specific instructions.

However, I can provide you with a general guide on how to enter a code on a Chamberlain garage door keypad:

Materials You’ll Need:

  • Chamberlain garage door keypad
  • Step stool or ladder (if needed)
  • Garage door opener manual (for specific instructions)

Step-by-Step Guide:

1. Locate the “Learn” Button:

  • Locate the “Learn” button on your Chamberlain garage door opener unit. This button is usually found on the motor unit that hangs from the ceiling in your garage. The button may be color-coded and could be green, purple, yellow, or another color.

2. Prepare the Keypad:

  • Make sure the keypad is ready for programming. Most Chamberlain keypads require you to enter the default PIN (Personal Identification Number) before you can set your own code.

3. Press the “Learn” Button:

  • Press and release the “Learn” button on the garage door opener unit. The indicator light on the unit should begin to blink, indicating that the opener is ready to learn a new code.

4. Enter the New Code:

  • On the Chamberlain keypad, enter the new code you want to program. Make sure to follow any specific instructions for your keypad model, such as the number of digits required.

5. Press the “Enter” or “Learn” Button on the Keypad:

  • After entering the new code, press the “Enter” or “Learn” button on the keypad. This button might be labeled differently depending on the keypad model.

6. Observe the Opener’s Lights:

  • Look at the indicator lights on the garage door opener unit. The lights may flash or change to indicate that the new code has been accepted.

7. Test the New Code:

  • Test the new code by pressing the numbers on the keypad and then pressing the “Enter” or “Open/Close” button. The garage door should respond by opening or closing.

8. Store the New Code:

  • Store the new code in a safe and easily accessible place. You might want to write it down in case you forget it.

9. Repeat for Additional Users (if needed):

  • If you have multiple users or family members who need access, you can repeat the programming process to set up additional codes for each person.

10. Review the Manual:

  • Consult the manual for your specific Chamberlain keypad model for any additional instructions or troubleshooting tips.

11. Seek Professional Help (if needed):

  • If you encounter difficulties during the programming process or if the keypad isn’t responding as expected, consider seeking assistance from a professional garage door technician or referring to Chamberlain’s customer support.

Conclusion:

Programming a code on a Chamberlain Haslet Gates & Garage Doors keypad is a convenient way to access your garage without a remote control. By following the general steps outlined above and referring to the specific instructions for your keypad model, you can successfully program a new code and enjoy the convenience of secure and easy garage access. Always prioritize safety and security when setting up access codes for your garage door.

Haslet Gates & Garage Doors

817-242-5042