If you’re experiencing difficulty opening or closing your garage door, the rollers might be the culprit. Over time, garage door rollers can wear out, become rusty or bent, causing the door to jam or become misaligned. Replacing the rollers is a task that can be accomplished by any DIYer with the right tools and some patience.

In this article, we’ll explain how to change garage door rollers step by step guide by Garage Door Repair Phoenix AZ.

Tools and Materials Needed:

  • New garage door rollers
  • Wrench set
  • Socket set
  • Pry bar
  • Screwdriver
  • Safety glasses
  • Lubricant spray
  • Step ladder

Step 1: Preparation

The first step is to make sure you have all the tools and materials you’ll need, including a set of new garage door rollers. Make sure to read the manufacturer’s instructions carefully before starting. Put on your safety glasses to protect your eyes during the process.

Step 2: Disconnect the Garage Door Opener

Before you begin to remove the old rollers, disconnect the garage door opener. You don’t want the door accidentally moving while you’re working on it. Pull the red emergency release handle to disconnect the opener from the door.

Step 3: Raise the Garage Door

Use the garage door opener or lift the door manually to the open position. Place a step ladder under the door to keep it in place while you work.

Step 4: Remove the Old Rollers

Locate the rollers on the side of the door that needs to be replaced. Use a wrench or socket set to loosen the bolts that hold the brackets that secure the rollers. Once the brackets are loose, use a pry bar to remove the old rollers from the track.

Step 5: Install the New Rollers

Install the new rollers by placing them into the bracket and tightening the bolts to secure them in place. Make sure the rollers are properly aligned with the track. Repeat the process for all the rollers that need to be replaced.

Step 6: Lubricate the Rollers and Track

Once all the new rollers are installed, apply a lubricant spray to the rollers and track. This will ensure that the door moves smoothly and quietly.

Step 7: Test the Door

After you’ve lubricated the rollers and track, test the door to make sure it moves smoothly and doesn’t jam or get stuck. If everything seems to be working correctly, reconnect the garage door opener.

Step 8: Maintenance

To keep your garage door rollers in good working condition, it’s important to perform regular maintenance. This includes cleaning the tracks, lubricating the rollers and track, and tightening any loose bolts or screws. Check the rollers periodically to make sure they’re still in good condition and replace them if necessary.

Conclusion

Replacing garage door rollers is a task that can be accomplished by anyone with the right tools and a bit of patience. By following these steps guide by Garage Door Repair Phoenix AZ, you can ensure that your garage door will operate smoothly and efficiently. Remember to always take safety precautions when working with any type of machinery, and if you’re unsure about anything, consult a professional.

Acclaim Garage Door Repair of Phoenix

1107 E Bell Rd ste 16, Phoenix, AZ 85022, United States

1-602-833-1218