I’d be happy to share my personal experience adjusting my garage door. As a homeowner, I recently noticed that my garage door wasn’t operating as smoothly as it used to. It was making strange noises and seemed to be struggling to open and close. After doing some research, I decided to adjust the door myself.

Here are the steps I followed from Garage Door Repair Murphy TX:

Step 1: Check the Door Balance

The first thing I did was check the balance of the door. I closed the door and disconnected the opener by pulling the emergency release cord. Then, I manually lifted the door to waist height and let it go. Unfortunately, the door did not stay in place or close slowly and smoothly, which meant it was unbalanced and needed to be adjusted.

Step 2: Adjust the Tension Springs

To adjust the tension springs, I used a winding bar to turn the spring in the appropriate direction. In my case, the door was too heavy, so I turned the spring towards the “more tension” direction to increase the tension. I made sure to adjust the tension springs in small increments to avoid over-tightening or under-tightening them.

Step 3: Adjust the Limit Screws

Next, I checked the stopping points of the door when it opened and closed. I found that the door wasn’t closing all the way, so I adjusted the limit screws. I located the limit screws on the side of the opener motor unit and used a screwdriver to turn them clockwise to decrease the opening.

Step 4: Lubricate the Moving Parts

I then lubricated the moving parts of the garage door, including the hinges, rollers, and springs, using a lubricant specifically designed for garage doors. I made sure to apply it to all moving parts to ensure that the door operated smoothly and quietly.

Step 5: Check the Weatherstripping

Lastly, I inspected the weatherstripping along the bottom of the garage door. I found that it was worn and damaged, so I replaced it with a new one. The weatherstripping helps keep out moisture, debris, and pests from entering the garage.

Tips:

  • It’s important to wear gloves and eye protection when working with tension springs, as they can be dangerous.
  • Keep children and pets away from the garage door while adjusting it.
  • Always make small adjustments to the tension springs to avoid over-tightening or under-tightening them.
  • Make sure to use a lubricant specifically designed for garage doors, as other lubricants may damage the moving parts.

Conclusion:

In reference to Garage Door Repair Murphy TX, adjusting my garage door was a relatively simple task that only took a few hours to complete. By following the steps outlined above, I was able to ensure that the door operated smoothly and safely. I checked the door balance, adjusted the tension springs and limit screws, lubricated the moving parts, and replaced the weatherstripping. Now, my garage door is functioning properly and I have peace of mind knowing that it’s in good condition.

Murphy Garage Door & Gates

223 FM 544 #16, Murphy, TX 75094, United States

469-425-7816