Adjusting a Garage Door Repair Justin TX is an important maintenance task that can keep your door functioning smoothly and extend its lifespan. Over time, garage doors can become misaligned or out of balance, causing them to operate poorly or even become dangerous.

In this guide, we’ll discuss the steps you can take to adjust your garage door and keep it in good working order.

Step 1: Check for Balance

Before making any adjustments to your garage door, it’s important to check that it’s properly balanced. To do this, start by disconnecting the opener and manually lifting the door to waist height. If the door stays in place when you let go, it’s balanced. If it falls or rises, it needs to be adjusted.

To adjust the balance of your garage door, locate the torsion spring above the door. This spring controls the weight of the door, and adjusting it can change the balance. Be aware that adjusting the torsion spring can be dangerous and should only be done by a professional.

Step 2: Check the Tracks

The tracks that guide your garage door can become misaligned over time, causing the door to operate poorly. To check the tracks, use a level to ensure that they’re both straight and level. If one or both of the tracks are out of alignment, loosen the bolts holding them in place and use a hammer to tap them back into position.

Step 3: Adjust the Limit Switches

The limit switches on your garage door opener control how far the door opens and closes. If these switches are set incorrectly, the door may not operate properly or may even become dangerous. To adjust the limit switches, start by opening the door fully and then closing it manually until it’s just above the ground. Turn off the power to the opener and locate the limit switches. Adjust them using a screwdriver until the door closes snugly against the ground.

Step 4: Check the Springs

Garage doors rely on springs to control their movement. Over time, these springs can become worn or damaged, causing the door to operate poorly or even become dangerous. To check the springs, start by disconnecting the opener and manually opening the door. The springs should expand and contract smoothly and evenly as you lift and lower the door.

If the springs are worn or damaged, they should be replaced. This is a job best left to a professional, as replacing garage door springs can be dangerous.

Step 5: Lubricate Moving Parts

Finally, it’s important to keep the moving parts of your garage door well-lubricated. This includes the rollers, tracks, hinges, and springs. Use a silicone-based lubricant to lubricate these parts, being careful not to get any lubricant on the tracks themselves.

By following these steps, you can adjust your Garage Door Repair Justin TX and keep it operating smoothly and safely. If you’re unsure about any of these steps, or if your garage door is still not operating properly after making adjustments, it’s best to call a professional for assistance. With proper maintenance, your garage door can last for many years to come.

Justin Best Garage & Overhead Doors

940-532-5824