Garage Door Repair San Diego CA Over time, these springs can wear out and need replacement. Replacing a torsion spring requires careful attention to safety procedures and the correct tools. Here’s a step-by-step guide:

1. Safety First

  • Before beginning any work, ensure your safety by wearing protective gear such as gloves and safety glasses.
  • Disconnect the power to the garage door opener to prevent any accidental activation.

2. Gather the Necessary Tools

  • Winding bars
  • Adjustable wrench
  • Vice grips
  • Stepladder
  • Socket wrench set
  • C-clamps
  • Replacement torsion spring
  • Safety cables (recommended)

3. Release Tension

  • Use vice grips to secure the garage door track below the bottom roller to prevent the door from moving.
  • Insert winding bars into the winding cone of the old torsion spring. Turn the winding bars slowly to release tension from the spring.

4. Remove the Old Spring

  • Once the tension is released, use a socket wrench to loosen the set screws on the winding cone.
  • Slide the winding bars out of the winding cone and carefully unwind the spring from the torsion tube.
  • Remove the spring from the torsion tube and set it aside.

5. Install the New Spring

  • Slide the new torsion spring onto the torsion tube, ensuring it is oriented correctly.
  • Wind the spring onto the torsion tube using the winding bars. Follow the manufacturer’s instructions for the number of turns required based on the weight of your garage door.

6. Secure the Spring

  • Once the spring is wound to the appropriate tension, insert the winding bars into the winding cone and tighten the set screws with a socket wrench.
  • Double-check that the spring is securely attached to the torsion tube and that the set screws are tightened properly.

7. Test the Door

  • Remove the vice grips from the garage door track and carefully lower the door to test its operation.
  • Check for smooth movement and ensure that the door opens and closes properly.

8. Install Safety Cables (Optional)

  • For added safety, consider installing safety cables on the extension springs to prevent them from flying off if they break.

9. Reconnect the Power

  • Once you have verified that the door is operating correctly, reconnect the power to the garage door opener.

10. Regular Maintenance

  • To extend the life of your new torsion spring, perform regular maintenance such as lubricating the springs and hinges.

Safety Tips:

  • Never attempt to replace a torsion spring alone. Always have someone present to assist you.
  • Exercise caution and follow proper procedures to avoid injury.
  • If you are unsure about any aspect of the replacement process, consult a professional garage door technician.

Garage Door Repair San Diego CA Remember, if you’re unsure about any part of the process, it’s always best to seek the help of a professional.

Garage Door Experts

3921 Fourth Ave, San Diego, CA 92103, United States

1-619-828-3886