Garage Door Repair Bridgeport TX sensors are an essential safety feature that ensures that the door will not close if there is an obstruction in its path. These sensors use infrared technology to detect obstacles, and if they are not properly aligned, the door will not close.

In this article, we will guide you through the process of lining up garage door Garage Door Repair Bridgeport TX sensors to ensure they work correctly:

Step 1: Check the Alignment The first step in aligning garage door sensors is to check their alignment. Start by looking at the sensors to see if they are in line with each other. If they are not, you will need to adjust them. You can do this by moving them slightly until they are in line with each other. It’s essential to make sure the sensors are aligned before continuing with the next step.

Step 2: Clean the Sensors Once you have ensured that the sensors are in line, the next step is to clean them. Dust, dirt, and debris can accumulate on the sensors over time, causing them to malfunction. You can clean the sensors with a soft, dry cloth or a cleaning solution designed for electronics. Avoid using water or any other liquid to clean the sensors.

Step 3: Adjust the Sensor Brackets If the sensors are still not working correctly after cleaning them, the next step is to adjust the sensor brackets. The sensor brackets are the metal pieces that hold the sensors in place. You can adjust them by loosening the screws that hold them in place and moving them slightly until the sensors are aligned correctly.

Step 4: Test the Sensors Once you have adjusted the sensor brackets, it’s time to test the sensors. Start by closing the garage door and interrupting the beam of light between the two sensors with an object, such as a broomstick. The door should immediately stop moving and reverse direction. If it does not, the sensors are still not aligned correctly, and you will need to repeat the previous steps until they are working correctly.

Step 5: Secure the Sensor Brackets After testing the sensors and ensuring they are working correctly, it’s time to secure the sensor brackets in place. Tighten the screws that hold the brackets in place to ensure that they will not move out of alignment again.

Conclusion:

Lining up garage door sensors is a simple process that can be done by anyone. By following the steps outlined above, you can ensure that your garage door sensors are working correctly and will provide you with the necessary safety features. Remember to check the alignment, clean the sensors, adjust the brackets, test the sensors, and secure the brackets in place. With these simple steps, you can keep your garage door functioning correctly and safely for years to come.

Bridgeport Best Garage & Overhead Doors

701 E Cates St, Bridgeport, TX 76426, United States

1-940-532-8593