Adjusting your garage door is an important maintenance task that can help ensure the smooth and safe operation of your garage door.
In this article, we will walk through the steps for adjusting your garage door based from Garage Door Repair Parma OH.
Step 1: Check the Balance of the Garage Door
The first step in adjusting your garage door is to check its balance. To do this, disconnect the garage door opener from the door by pulling the release cord. With the garage door in the closed position, lift the door manually to waist height and release it. The door should stay in place or close slowly and smoothly. If the door falls quickly or is difficult to lift, it may be unbalanced and require adjustment.
Step 2: Adjust the Tension Springs
The tension springs are responsible for counterbalancing the weight of the garage door. If the door is unbalanced, it may be due to a problem with the tension springs. To adjust the tension springs, first, make sure the garage door is closed. Next, locate the tension springs on either side of the door. Using a winding bar, turn the spring in the direction that will increase tension on the spring. Turn the spring a quarter turn at a time, testing the balance of the door after each adjustment.
Step 3: Adjust the Limit Screws
The limit screws are located on the garage door opener and control the opening and closing limits of the door. If the door is not opening or closing all the way, it may be due to a problem with the limit screws. To adjust the limit screws, locate them on the garage door opener and use a screwdriver to turn them clockwise or counterclockwise to adjust the travel distance of the door. Test the door after each adjustment to ensure it is opening and closing properly.
Step 4: Adjust the Track
The garage door track can also affect the balance and operation of the door. To adjust the track, first, make sure the garage door is closed. Using a level, check the alignment of the track on both sides of the door. If the track is not level, use a wrench to loosen the bolts holding the track in place and adjust the track until it is level. Tighten the bolts back up and test the door to ensure it is opening and closing properly.
Step 5: Lubricate Moving Parts
Finally, it is important to lubricate the moving parts of the garage door regularly to ensure smooth operation. Use a silicone-based lubricant to lubricate the springs, rollers, hinges, and tracks. Avoid using oil-based lubricants, as they can attract dust and dirt and cause more problems.
Conclusion
Overall, as stated in Garage Door Repair Parma OH, adjusting your garage door is an important maintenance task that can help ensure the smooth and safe operation of your garage door. By following the steps outlined above, you can adjust your garage door and keep it operating properly for years to come. If you are unsure about how to adjust your garage door or encounter any problems, it is always best to consult a professional garage door technician for assistance.
Parma Garage Door Repair
3710 Albertly Ave #8, Parma, OH 44134
440-762-6587